5 Somfy Roller Shutter Motors Compared In Adelaide (2026)
Choosing the right motor can make or break your roller shutter setup. Somfy roller shutter motors are among the most popular options we see across Adelaide homes and businesses, and for good reason. They’re reliable, well-supported, and available in a range of configurations to suit different shutter sizes and automation needs. But with several models on offer, picking the best one for your situation isn’t always straightforward.
We’ve installed and replaced enough Somfy motors over our 40+ years servicing roller shutters in Adelaide to know which models hold up and which suit specific applications. Whether you’re upgrading a manual shutter to electric or replacing a worn-out motor, the differences between models matter more than most people realise.
In this guide, we compare five Somfy roller shutter motors available in Adelaide right now, covering features, suited applications, and what to watch out for. By the end, you’ll have a clear picture of which motor fits your setup and whether a DIY purchase or our professional installation makes more sense for your situation.
1. Somfy Oximo RTS 50
The Oximo RTS 50 is one of the most widely used Somfy roller shutter motors in residential Adelaide installs. It runs on radio frequency (RTS) control, which means no wired switch is required. A remote or compatible wall switch communicates wirelessly instead, making it a strong choice when retrofitting an existing manual shutter where running new cable to a switch point is difficult or costly.
Key features and controls
This motor operates on 433.42 MHz RTS radio technology, which is compatible with the broader Somfy remote and smart home ecosystem. You can control it with Somfy Telis, Situo, or Smoove remotes, and it also integrates with the Somfy TaHoma smart home hub if you want app-based or voice control through platforms like Amazon Alexa or Google Home. The motor includes built-in obstacle detection, which stops the shutter automatically if it contacts something unexpected during travel.
This makes the Oximo RTS 50 a practical choice for households wanting basic home automation without committing to major rewiring.
Sizing and compatibility checks
Before ordering, confirm that the 50mm tube diameter matches your current shutter setup. The “50” in the name refers directly to that tube size, which suits most standard residential roller shutter boxes across Adelaide. You also need to verify the torque rating your shutter curtain requires, as the Oximo RTS 50 is available in options typically ranging from 6 Nm to 20 Nm, with higher torque values suited to larger or heavier curtains.
Typical pricing and install notes in Adelaide
Expect to pay $350 to $800 AUD for the motor unit alone through Australian suppliers. Professional installation in Adelaide adds labour on top of that, and given the RTS system requires correct limit setting and remote pairing, a qualified technician handling the setup is strongly recommended to avoid motor damage from incorrect configuration.
2. Somfy LT 50 240V hardwired
The LT 50 is a 240V hardwired motor and one of the most widely installed Somfy roller shutter motors across Adelaide commercial properties. Rather than relying on radio remotes, it connects directly to a hard-wired wall switch, which makes it dependable and straightforward to operate long-term.
Key features and controls
This motor runs on a standard 3-wire connection with up, down, and stop control through a fixed wall switch. Limit positions are set mechanically at the motor head, and there is no smart home integration, which suits shopfronts and warehouses where reliable, no-fuss operation matters most.
If you want a motor that works without remotes, batteries, or pairing steps, the LT 50 delivers exactly that.
Sizing and compatibility checks
Like the Oximo RTS 50, this motor suits a 50mm tube diameter and comes in multiple torque ratings. Use the guide below to match torque to your curtain:
| Torque | Suitable for |
|---|---|
| 6 Nm | Small, lightweight curtains |
| 10 Nm | Mid-size residential shutters |
| 20 Nm | Larger or heavier commercial curtains |
Typical pricing and install notes in Adelaide
Motor-only pricing sits between $250 and $450 AUD depending on torque variant. Because this motor runs on 240V, a licensed electrician must handle the hardwiring, so include that labour cost in your overall budget from the start.
3. Somfy LTN50 Roller Shutter Motor
The LTN50 is the quieter option among Somfy roller shutter motors in this comparison. It uses a hardwired 240V connection but adds a noise-reduction system that cuts vibration during travel, making it well suited to bedrooms and living areas where motor noise is a genuine concern.
Key features and controls
This motor runs on a standard 3-wire hardwired switch for up, down, and stop control. Its main advantage over the LT 50 is built-in noise dampening, which reduces vibration transferred through the shutter tube during operation. Limit positions are set mechanically at the motor head, so there is no remote pairing or wireless setup involved.
For shutters near living spaces where noise matters, the LTN50 is worth the price difference over the standard LT 50.
Sizing and compatibility checks
The LTN50 suits a 50mm tube diameter and comes in torque ratings from 6 Nm to 20 Nm. Match the torque to your curtain weight before ordering.
- 6 Nm: Small, lightweight curtains
- 10 Nm: Standard residential shutters
- 20 Nm: Larger or heavier curtains
Typical pricing and install notes in Adelaide: Ph 0414611662 for profeesional advice and install
Motor-only pricing sits between $220 and $340 AUD depending on torque. Because this is a 240V hardwired motor, a licensed electrician must complete the wiring in Adelaide.
Your installer will also set the mechanical limit positions at the motor head before returning the shutter to you.
4. Somfy Altus RTS 50
The Somfy Altus RTS 50 combines radio frequency control with built-in sun and wind sensor compatibility, making it one of the more capable Somfy roller shutter motors in this comparison. It suits homeowners who want automated responses to weather conditions without relying on a separate smart hub to trigger those actions.
Key features and controls
This motor runs on 433.42 MHz RTS technology and pairs with the full range of Somfy RTS remotes and wall switches. Its standout feature is compatibility with Somfy sun and wind sensors, which can automatically raise your shutter in strong winds or lower it when sunlight hits a set intensity. It also integrates with the Somfy TaHoma hub for app and voice control through Alexa or Google Home.
If you want automated weather responses without hardwiring sensors to a motor controller, the Altus RTS 50 is the most practical option in this list.
Sizing and compatibility checks
The Altus RTS 50 suits a 50mm tube diameter and comes in torque ratings from 6 Nm to 20 Nm. Confirm your curtain weight before ordering to avoid underpowering a heavier shutter.
Typical pricing and install notes in Adelaide
Motor-only pricing sits between $380 and $750 AUD through Australian suppliers. Professional installation is strongly recommended given the RTS pairing and sensor configuration steps involved at setup.
5. Somfy Ilmo 2 50 WT
The Somfy Ilmo 2 50 WT is built for tubular roller shutters that run on a battery-powered system, removing the need for mains wiring altogether. Among Somfy roller shutter motors, it stands out as the most practical choice when running power to the shutter location is impractical or too costly.
Key features and controls
This motor runs on a rechargeable lithium-ion battery and uses RTS radio technology for wireless control through Somfy remotes or compatible wall switches. Battery life varies depending on usage frequency, but most installs see several months between charges. It also integrates with the Somfy TaHoma hub for app-based control through Alexa or Google Home.
Sizing and compatibility checks
The Ilmo 2 50 WT fits a 50mm tube diameter and suits lighter residential curtains, as the battery-powered system delivers lower torque than mains-powered motors. Check your curtain weight before ordering:
- Suits curtains roughly under 8 kg
- Not recommended for large or heavy commercial curtains
Typical pricing and install notes in Adelaide
Expect to pay $450 to $600 AUD for the motor unit.
Correct limit setting and RTS pairing still benefit from our professional technician to avoid operational issues down the track. PH 0414611662
Next steps for your roller shutters PH 0414611662
Now that you’ve compared the five Somfy roller shutter motors available in Adelaide, the next step is matching the right model to your specific shutter setup. Tube diameter, curtain weight, and whether you need wireless or hardwired control are the three factors that will narrow your choice quickly. If you’re still unsure after working through those, a quick conversation with an experienced technician saves you from ordering the wrong unit.
Getting the installation right matters just as much as picking the right motor. Incorrect limit settings or mismatched torque can damage your shutter curtain or void your motor warranty, so professional installation is worth factoring into your budget from the start. Whether you need a motor replacement, a manual-to-electric conversion, or a full new installation across Adelaide’s suburbs, our team is ready to help. Contact Roller Shutter Repairs Adelaide to get your project moving.
